Techniniai dokumentai
Specifikacijos
Markė
DiodesZetexTvirtinimo tipas
Surface Mount
Magnetic Type
Omnipolar
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Supply Voltage
2.5 V
Pakuotės tipas
TSOT-23
Kaiščių skaičius
3
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Produkto aprašymas
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,259
Each (In a Pack of 20) (be PVM)
€ 0,313
Each (In a Pack of 20) (su PVM)
20
€ 0,259
Each (In a Pack of 20) (be PVM)
€ 0,313
Each (In a Pack of 20) (su PVM)
20
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
20 - 140 | € 0,259 | € 5,19 |
160 - 740 | € 0,253 | € 5,06 |
760 - 1480 | € 0,236 | € 4,72 |
1500+ | € 0,222 | € 4,43 |
Techniniai dokumentai
Specifikacijos
Markė
DiodesZetexTvirtinimo tipas
Surface Mount
Magnetic Type
Omnipolar
Maximum Operating Supply Voltage
5.5 V
Minimum Operating Supply Voltage
2.5 V
Pakuotės tipas
TSOT-23
Kaiščių skaičius
3
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Produkto aprašymas
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.