Techniniai dokumentai
Specifikacijos
Markė
CrouzetMonitoring Application
Phase, Voltage
Electrical Phase
3
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SPDT
Voltage Sensitivity
Overvoltage, Undervoltage
Tvirtinimo tipas
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Serija
MWUA
Matmenys
69 x 17.5 x 92.6mm
Operating Temperature Range
+50°C
Minimali darbinė temperatūra
-20°C
Plotis
17.5mm
Maksimali darbinė temperatūra
+50°C
Maximum Voltage Sensed
528V ac
Ilgis
69mm
Minimum Voltage Sensed
183V ac
Aukštis
92.6mm
Produkto aprašymas
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 207,10
už 1 vnt. (be PVM)
€ 250,59
už 1 vnt. (su PVM)
1
€ 207,10
už 1 vnt. (be PVM)
€ 250,59
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 207,10 |
5 - 9 | € 193,80 |
10 - 24 | € 183,35 |
25 - 49 | € 175,75 |
50+ | € 171,95 |
Techniniai dokumentai
Specifikacijos
Markė
CrouzetMonitoring Application
Phase, Voltage
Electrical Phase
3
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SPDT
Voltage Sensitivity
Overvoltage, Undervoltage
Tvirtinimo tipas
DIN Rail
Phase Sensitivity
Phase Failure, Phase Imbalance, Phase Sequence
Time Delay
0.1 → 10s
Serija
MWUA
Matmenys
69 x 17.5 x 92.6mm
Operating Temperature Range
+50°C
Minimali darbinė temperatūra
-20°C
Plotis
17.5mm
Maksimali darbinė temperatūra
+50°C
Maximum Voltage Sensed
528V ac
Ilgis
69mm
Minimum Voltage Sensed
183V ac
Aukštis
92.6mm
Produkto aprašymas
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.