Crouzet Phase, Voltage Monitoring Relay, SP-NO/NC, 183 → 528V ac
Techniniai dokumentai
Specifikacijos
Markė
CrouzetMonitoring Application
Phase, Voltage
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SP-NO/NC
Voltage Sensitivity
Undervoltage
Phase Sensitivity
Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Matmenys
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Aukštis
92.6mm
Ilgis
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
-20 → +50°C
Minimali darbinė temperatūra
-20°C
Plotis
17.5mm
Maksimali darbinė temperatūra
+50°C
Kilmės šalis
France
Produkto aprašymas
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 97,12
už 1 vnt. (be PVM)
€ 117,52
už 1 vnt. (su PVM)
1
€ 97,12
už 1 vnt. (be PVM)
€ 117,52
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 97,12 |
| 5+ | € 93,45 |
Techniniai dokumentai
Specifikacijos
Markė
CrouzetMonitoring Application
Phase, Voltage
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SP-NO/NC
Voltage Sensitivity
Undervoltage
Phase Sensitivity
Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Matmenys
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Aukštis
92.6mm
Ilgis
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
-20 → +50°C
Minimali darbinė temperatūra
-20°C
Plotis
17.5mm
Maksimali darbinė temperatūra
+50°C
Kilmės šalis
France
Produkto aprašymas
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.