ACPL-7900-300E Broadcom, Isolation Amplifier, 3 → 5.5 V, 8-Pin PDIP
Techniniai dokumentai
Specifikacijos
Markė
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
3 → 5.5 V
Number of Channels per Chip
1
Maximum Voltage Gain
8.44V/V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
PDIP
Kaiščių skaičius
8
Matmenys
9.8 x 6.35 x 3.56mm
Aukštis
3.56mm
Plotis
6.35mm
Ilgis
9.8mm
Maksimali darbinė temperatūra
+105 °C
Minimali darbinė temperatūra
-40 °C
Produkto aprašymas
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 7,56
Už kiekviena vnt. (tiekiama tuboje) (be PVM)
€ 9,148
Už kiekviena vnt. (tiekiama tuboje) (su PVM)
2
€ 7,56
Už kiekviena vnt. (tiekiama tuboje) (be PVM)
€ 9,148
Už kiekviena vnt. (tiekiama tuboje) (su PVM)
2
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Vamzdelis |
|---|---|---|
| 2 - 8 | € 7,56 | € 15,12 |
| 10 - 18 | € 6,405 | € 12,81 |
| 20 - 48 | € 5,67 | € 11,34 |
| 50 - 98 | € 4,935 | € 9,87 |
| 100+ | € 4,568 | € 9,14 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Techniniai dokumentai
Specifikacijos
Markė
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
3 → 5.5 V
Number of Channels per Chip
1
Maximum Voltage Gain
8.44V/V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
PDIP
Kaiščių skaičius
8
Matmenys
9.8 x 6.35 x 3.56mm
Aukštis
3.56mm
Plotis
6.35mm
Ilgis
9.8mm
Maksimali darbinė temperatūra
+105 °C
Minimali darbinė temperatūra
-40 °C
Produkto aprašymas
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products