Bartec ComEx Series Illuminated Push Button, Panel Mount, 30.5mm Cutout, SPST, IP67
Techniniai dokumentai
Specifikacijos
Markė
BartecIlluminated
Yes
Panel Cut Out Diameter
30.5mm
Tvirtinimo tipas
Panel Mount
Contact Configuration
SPST
IP Rating
IP67
Serija
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Type
Wire Lead
Maximum AC Voltage
230V
Maximum DC Voltage
24V
Minimali darbinė temperatūra
-40°C
Hazardous Area Certification
ATEX
Maksimali darbinė temperatūra
+50°C
Kilmės šalis
Germany
Produkto aprašymas
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
P.O.A.
1
P.O.A.
1
Techniniai dokumentai
Specifikacijos
Markė
BartecIlluminated
Yes
Panel Cut Out Diameter
30.5mm
Tvirtinimo tipas
Panel Mount
Contact Configuration
SPST
IP Rating
IP67
Serija
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Type
Wire Lead
Maximum AC Voltage
230V
Maximum DC Voltage
24V
Minimali darbinė temperatūra
-40°C
Hazardous Area Certification
ATEX
Maksimali darbinė temperatūra
+50°C
Kilmės šalis
Germany
Produkto aprašymas
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.