Bartec Plunger Limit Switch, NO/NC, IP54, Duroplast Housing, 250V ac Max, 5A Max
Techniniai dokumentai
Specifikacijos
Markė
BartecActuator Type
Plunger
Normal State Configuration
NO/NC
IP Rating
IP54
Maximum Current
5A
Housing Material
Duroplast
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Ilgis
29.8mm
Minimali darbinė temperatūra
-40°C
Gylis
10mm
Plotis
18mm
Maksimali darbinė temperatūra
+90°C
Hazardous Area Certification
ATEX
Mechanical Life
10000000Cycles
Mechanical Life (Minimum)
10⁷ cycles
Kilmės šalis
Germany
Produkto aprašymas
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 198,55
už 1 vnt. (be PVM)
€ 240,25
už 1 vnt. (su PVM)
1
€ 198,55
už 1 vnt. (be PVM)
€ 240,25
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 198,55 |
| 5 - 9 | € 190,95 |
| 10+ | € 181,45 |
Techniniai dokumentai
Specifikacijos
Markė
BartecActuator Type
Plunger
Normal State Configuration
NO/NC
IP Rating
IP54
Maximum Current
5A
Housing Material
Duroplast
Maximum AC Voltage
250V
Maximum DC Voltage
250V
Ilgis
29.8mm
Minimali darbinė temperatūra
-40°C
Gylis
10mm
Plotis
18mm
Maksimali darbinė temperatūra
+90°C
Hazardous Area Certification
ATEX
Mechanical Life
10000000Cycles
Mechanical Life (Minimum)
10⁷ cycles
Kilmės šalis
Germany
Produkto aprašymas
Bartec Miniature Limit Switch / Insert Switch
EExd miniature switches for use in areas where a flameproof switching element is required. Two types of switches are available to suit different equipment construction requirements, Limit Switches and Insert Switches. The Limit Switch type requires mechanical protection for the switch body and cable, no further testing is required. The Insert Switch is to be installed in a enclosure that provides mechanical protection and which fulfils the requirements of EN 50014 section 1.2 .