Techniniai dokumentai
Specifikacijos
Brand
Arcol OhmiteResistance
200mΩ
Power Rating
5W
Tolerance
±1%
Series
15
Maximum Operating Temperature
+275°C
Minimum Operating Temperature
-55°C
Kilmės šalis
Mexico
Produkto aprašymas
Ohmite 10 Series Current Sense Resistors
Ohmite 10 Series are current sense axial resistors. Two versions of the 10 series axial resistors are available, with either two terminals or four terminals.
The four termination variation is designed for use in a Kelvin configuration. This configuration allows a current to be applied through two opposite terminals while the sensing voltage is measure across the other two terminals. The temperature coefficient of the terminals and the resistance is practically eliminated by the Kelvin configuration. The use of four terminals enables a lower self-heating drift and lower temperature coefficient of resistance than traditional two terminal axial resistors.
Current Sense - Axial Through Hole
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 3,182
Each (In a Bag of 5) (be PVM)
€ 3,85
Each (In a Bag of 5) (su PVM)
5
€ 3,182
Each (In a Bag of 5) (be PVM)
€ 3,85
Each (In a Bag of 5) (su PVM)
5
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Maišas |
---|---|---|
5 - 20 | € 3,182 | € 15,91 |
25 - 95 | € 2,802 | € 14,01 |
100 - 245 | € 2,422 | € 12,11 |
250 - 495 | € 2,28 | € 11,40 |
500+ | € 2,138 | € 10,69 |
Techniniai dokumentai
Specifikacijos
Brand
Arcol OhmiteResistance
200mΩ
Power Rating
5W
Tolerance
±1%
Series
15
Maximum Operating Temperature
+275°C
Minimum Operating Temperature
-55°C
Kilmės šalis
Mexico
Produkto aprašymas
Ohmite 10 Series Current Sense Resistors
Ohmite 10 Series are current sense axial resistors. Two versions of the 10 series axial resistors are available, with either two terminals or four terminals.
The four termination variation is designed for use in a Kelvin configuration. This configuration allows a current to be applied through two opposite terminals while the sensing voltage is measure across the other two terminals. The temperature coefficient of the terminals and the resistance is practically eliminated by the Kelvin configuration. The use of four terminals enables a lower self-heating drift and lower temperature coefficient of resistance than traditional two terminal axial resistors.