Allegro Microsystems Through Hole Hall Effect Sensor Switch, SIP, 3-Pin
Techniniai dokumentai
Specifikacijos
Markė
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Tvirtinimo tipas
Through Hole
Magnetic Type
Unipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Pakuotės tipas
SIP
Aukštis
3.02mm
Matmenys
4.09 x 1.52 x 3.02mm
Kaiščių skaičius
3
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Typical Magnetic Sensor Hysteresis
10 Gs
Produkto aprašymas
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,884
Each (In a Bag of 500) (be PVM)
€ 1,07
Each (In a Bag of 500) (su PVM)
500
€ 0,884
Each (In a Bag of 500) (be PVM)
€ 1,07
Each (In a Bag of 500) (su PVM)
500
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Techniniai dokumentai
Specifikacijos
Markė
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Tvirtinimo tipas
Through Hole
Magnetic Type
Unipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Pakuotės tipas
SIP
Aukštis
3.02mm
Matmenys
4.09 x 1.52 x 3.02mm
Kaiščių skaičius
3
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Typical Magnetic Sensor Hysteresis
10 Gs
Produkto aprašymas
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products