Advance Tapes AT544 Conductive Tin Clad Copper Tape, 25mm x 33m
Techniniai dokumentai
Specifikacijos
Markė
Advance TapesTotal Thickness
0.06mm
Foil Thickness
0.035mm
Plotis
25mm
Ilgis
33m
Conductivity
Conductive
Adhesion Strength
5 N/cm
Adhesive Material
Acrylic
Material Plating
Tin
Tensile Strength
40N/cm
Maximum Temperature Resistance
+155°C
Complies with EN Legislation
BS EN 60454 - Part 2
Minimum Temperature Resistance
-20°C
Model Number
AT544
Kilmės šalis
Ireland
Produkto aprašymas
AT544 35μ Tin Clad Copper Foil Masking Tape
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal
Approvals
Conforms to Flame Retardant requirement part only of UL510
Standards
Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S
EMI/RFI Shielding Tapes
When using these tapes galvanic compatibility should be taken into account.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 3,895
už 1 vnt. (be PVM)
€ 4,713
už 1 vnt. (su PVM)
33
€ 3,895
už 1 vnt. (be PVM)
€ 4,713
už 1 vnt. (su PVM)
33
Techniniai dokumentai
Specifikacijos
Markė
Advance TapesTotal Thickness
0.06mm
Foil Thickness
0.035mm
Plotis
25mm
Ilgis
33m
Conductivity
Conductive
Adhesion Strength
5 N/cm
Adhesive Material
Acrylic
Material Plating
Tin
Tensile Strength
40N/cm
Maximum Temperature Resistance
+155°C
Complies with EN Legislation
BS EN 60454 - Part 2
Minimum Temperature Resistance
-20°C
Model Number
AT544
Kilmės šalis
Ireland
Produkto aprašymas
AT544 35μ Tin Clad Copper Foil Masking Tape
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal
Approvals
Conforms to Flame Retardant requirement part only of UL510
Standards
Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S
EMI/RFI Shielding Tapes
When using these tapes galvanic compatibility should be taken into account.