Techniniai dokumentai
Specifikacijos
Markė
ADAFRUIT INDUSTRIESClassification
Development Board
Kit Name
GEMMA V2
Technologija
Wearable
Processor Part Number
ATtiny85
Processor Type
MCU
Produkto aprašymas
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 14,38
už 1 vnt. (be PVM)
€ 17,40
už 1 vnt. (su PVM)
1
€ 14,38
už 1 vnt. (be PVM)
€ 17,40
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 14,38 |
5 - 9 | € 12,50 |
10+ | € 10,50 |
Techniniai dokumentai
Specifikacijos
Markė
ADAFRUIT INDUSTRIESClassification
Development Board
Kit Name
GEMMA V2
Technologija
Wearable
Processor Part Number
ATtiny85
Processor Type
MCU
Produkto aprašymas
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.