Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityCoaxial Connector Type
N Connector
Gender
Female
Tvirtinimo tipas
Panel Mount
Impedance
50Ω
Užbaigimo būdas
Solder
Body Orientation
Straight
Operating Frequency
0 to 11GHz
Body Plating
Silver
Minimali darbinė temperatūra
-65°C
Maksimali darbinė temperatūra
+165°C
Contact Material
Brass
Contact Plating
Silver
Produkto aprašymas
TE Connectivity 50 Ohm N Series Panel Mount Jack
50 Ohm N series panel mount jack with a solder termination, PTFE dielectric, silver plated brass body and silver plated centre contact. This 50 Ohm N series panel mount socket has a 25.40mm square flange with 4 x 3.2mm mounting holes and can be rear or front mounted onto the panel.
TE Connectivity N Series RF Coaxial Connectors
For information regarding appropriate crimp tooling refer to the Connector/Cable/Tooling Compatibility table at the beginning of this section, in the paper catalogue
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 10,29
už 1 vnt. (be PVM)
€ 12,45
už 1 vnt. (su PVM)
1
€ 10,29
už 1 vnt. (be PVM)
€ 12,45
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 14 | € 10,29 |
15 - 49 | € 8,61 |
50 - 99 | € 7,35 |
100 - 249 | € 6,62 |
250+ | € 5,88 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityCoaxial Connector Type
N Connector
Gender
Female
Tvirtinimo tipas
Panel Mount
Impedance
50Ω
Užbaigimo būdas
Solder
Body Orientation
Straight
Operating Frequency
0 to 11GHz
Body Plating
Silver
Minimali darbinė temperatūra
-65°C
Maksimali darbinė temperatūra
+165°C
Contact Material
Brass
Contact Plating
Silver
Produkto aprašymas
TE Connectivity 50 Ohm N Series Panel Mount Jack
50 Ohm N series panel mount jack with a solder termination, PTFE dielectric, silver plated brass body and silver plated centre contact. This 50 Ohm N series panel mount socket has a 25.40mm square flange with 4 x 3.2mm mounting holes and can be rear or front mounted onto the panel.
TE Connectivity N Series RF Coaxial Connectors
For information regarding appropriate crimp tooling refer to the Connector/Cable/Tooling Compatibility table at the beginning of this section, in the paper catalogue