Techniniai dokumentai
Specifikacijos
Markė
Silicon LabsPower Supply Type
Single
Typical Single Supply Voltage
3 → 5.5 V
Number of Channels per Chip
2
Output Type
Differential
Maximum Supply Current
5.5 mA
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
SOIC
Kaiščių skaičius
16
Matmenys
10.3 x 7.5 x 2.35mm
Aukštis
2.35mm
Ilgis
10.3mm
Maximum Operating Supply Voltage
5.5 V
Maksimali darbinė temperatūra
+125 °C
Plotis
7.5mm
Minimum Operating Supply Voltage
3 V
Minimali darbinė temperatūra
-40 °C
Kilmės šalis
Taiwan, Province Of China
Produkto aprašymas
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
P.O.A.
2
P.O.A.
2
Techniniai dokumentai
Specifikacijos
Markė
Silicon LabsPower Supply Type
Single
Typical Single Supply Voltage
3 → 5.5 V
Number of Channels per Chip
2
Output Type
Differential
Maximum Supply Current
5.5 mA
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
SOIC
Kaiščių skaičius
16
Matmenys
10.3 x 7.5 x 2.35mm
Aukštis
2.35mm
Ilgis
10.3mm
Maximum Operating Supply Voltage
5.5 V
Maksimali darbinė temperatūra
+125 °C
Plotis
7.5mm
Minimum Operating Supply Voltage
3 V
Minimali darbinė temperatūra
-40 °C
Kilmės šalis
Taiwan, Province Of China
Produkto aprašymas
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.