Techniniai dokumentai
Specifikacijos
Markė
SickAccessory Type
Cordset
For Use With
C2MT Light Curtain, C4MT Light Curtain
Contact Configuration
2NC
Contact Configuration
2NC
Kilmės šalis
Germany
Produkto aprašymas
miniTwin Safety Light Curtain - C2MT and C4MT Series
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender and receiver, in a 3 pair format. Each miniTwin can be used as part of a stand-alone pair, as 2 pair or with the additional purchase of a double plug cascade cable as a cascade (3 pair) format. When cascading in 2 pair or 3 pair there are no blind spots and the miniTwin automatically configures which pair acts as the host and which as the guest. An additional cascade cable is needed for 3 pair configurations, use 701-2962 for miniTwin up to 540mm, or 701-2971 for miniTwin over 600mm, use these to replace the detachable M12 connection plug on the rear of the miniTwin with a 2 x M12 dual plug connector.
Light Curtain
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 93,98
už 1 vnt. (be PVM)
€ 113,71
už 1 vnt. (su PVM)
1
€ 93,98
už 1 vnt. (be PVM)
€ 113,71
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
SickAccessory Type
Cordset
For Use With
C2MT Light Curtain, C4MT Light Curtain
Contact Configuration
2NC
Contact Configuration
2NC
Kilmės šalis
Germany
Produkto aprašymas
miniTwin Safety Light Curtain - C2MT and C4MT Series
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender and receiver, in a 3 pair format. Each miniTwin can be used as part of a stand-alone pair, as 2 pair or with the additional purchase of a double plug cascade cable as a cascade (3 pair) format. When cascading in 2 pair or 3 pair there are no blind spots and the miniTwin automatically configures which pair acts as the host and which as the guest. An additional cascade cable is needed for 3 pair configurations, use 701-2962 for miniTwin up to 540mm, or 701-2971 for miniTwin over 600mm, use these to replace the detachable M12 connection plug on the rear of the miniTwin with a 2 x M12 dual plug connector.