Phoenix Contact 3RS7025 Series Signal Conditioner, Thermocouple Input, Current, Voltage Output, 9.6 → 30V dc
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
Thermocouple
Output Signal Type
Current, Voltage
Input Range
-250 → +2500°C
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Serija
3RS7025
Maksimali darbinė temperatūra
+65°C
Termination
Screw
Minimali darbinė temperatūra
-20°C
Distrelec Product Id
30061862
Kilmės šalis
Germany
Produkto aprašymas
Configurable All Type Thermocouple Transducer
Configurable 3-way isolated temperature transducer. The device is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal.
The device can either be configured via DIP switches or, with extended functionality, via the S port using the software (FDT/ DTM).
The device supports fault monitoring.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 246,05
už 1 vnt. (be PVM)
€ 297,72
už 1 vnt. (su PVM)
1
€ 246,05
už 1 vnt. (be PVM)
€ 297,72
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
Thermocouple
Output Signal Type
Current, Voltage
Input Range
-250 → +2500°C
Output Range
0 → 10 V, 0 → 20 mA, 0 → 5 V, 1 → 5 V, 10 → 0 V, 20 → 0 mA, 20 → 4 mA, 4 → 20mA
Supply Voltage
9.6 → 30V dc
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Serija
3RS7025
Maksimali darbinė temperatūra
+65°C
Termination
Screw
Minimali darbinė temperatūra
-20°C
Distrelec Product Id
30061862
Kilmės šalis
Germany
Produkto aprašymas
Configurable All Type Thermocouple Transducer
Configurable 3-way isolated temperature transducer. The device is suitable for the connection of thermocouples. The measured values are converted into a linear current or voltage signal.
The device can either be configured via DIP switches or, with extended functionality, via the S port using the software (FDT/ DTM).
The device supports fault monitoring.