Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Serija
3RS7003
Number of Channels
2
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+60°C
Kilmės šalis
Germany
Produkto aprašymas
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 317,10
už 1 vnt. (be PVM)
€ 383,69
už 1 vnt. (su PVM)
1
€ 317,10
už 1 vnt. (be PVM)
€ 383,69
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Serija
3RS7003
Number of Channels
2
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+60°C
Kilmės šalis
Germany
Produkto aprašymas
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.