Parker Double, CETOP Mounting Hydraulic Check Valve, ZRE-AB02-D1, 120L/min, 2bar Cracking Pressure
Techniniai dokumentai
Specifikacijos
Markė
ParkerCracking Pressure
2bar
Maximum Flow Rate
120L/min
Manufacturer Series
ZRE
CETOP Mounting
CETOP 5
Single/Double
Double
Maximum Operating Pressure
315 bar
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+60°C
PRICED TO CLEAR
Yes
Produkto aprašymas
CETOP 05 Pilot Operated Check Valves
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).
Check Valves
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 295,45
už 1 vnt. (be PVM)
€ 357,49
už 1 vnt. (su PVM)
1
€ 295,45
už 1 vnt. (be PVM)
€ 357,49
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
ParkerCracking Pressure
2bar
Maximum Flow Rate
120L/min
Manufacturer Series
ZRE
CETOP Mounting
CETOP 5
Single/Double
Double
Maximum Operating Pressure
315 bar
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+60°C
PRICED TO CLEAR
Yes
Produkto aprašymas
CETOP 05 Pilot Operated Check Valves
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).
Check Valves
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.