Techniniai dokumentai
Specifikacijos
Markė
onsemiDirection Type
Uni-Directional
Diode Configuration
Single
Minimum Breakdown Voltage
5.5V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
POWERMITE
Kaiščių skaičius
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+150 °C
Matmenys
2.05 x 2.18 x 1.15mm
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Ilgis
2.05mm
Test Current
1A
Aukštis
1.15mm
Plotis
2.18mm
Produkto aprašymas
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.
Transient Voltage Suppressors, ON Semiconductor
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,579
Už kiekviena vnt. (tiekiama juostoje) (be PVM)
€ 0,70
Už kiekviena vnt. (tiekiama juostoje) (su PVM)
10
€ 0,579
Už kiekviena vnt. (tiekiama juostoje) (be PVM)
€ 0,70
Už kiekviena vnt. (tiekiama juostoje) (su PVM)
10
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Juosta |
---|---|---|
10 - 20 | € 0,579 | € 5,79 |
30 - 140 | € 0,55 | € 5,50 |
150 - 740 | € 0,368 | € 3,68 |
750 - 1490 | € 0,346 | € 3,46 |
1500+ | € 0,272 | € 2,72 |
Techniniai dokumentai
Specifikacijos
Markė
onsemiDirection Type
Uni-Directional
Diode Configuration
Single
Minimum Breakdown Voltage
5.5V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
POWERMITE
Kaiščių skaičius
2
Peak Pulse Power Dissipation
1.56W
Number of Elements per Chip
1
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+150 °C
Matmenys
2.05 x 2.18 x 1.15mm
Maximum Reverse Leakage Current
250µA
Automotive Standard
AEC-Q101
Ilgis
2.05mm
Test Current
1A
Aukštis
1.15mm
Plotis
2.18mm
Produkto aprašymas
LED Shunt Protectors, ON Semiconductor
These devices provide a current bypass when an LED fails to ensure that whole strings of LEDs are not affected by one LED failure. Particularly useful in lighting applications which require a high degree of reliability. They are also applicable to other loads where circuit continuity is required.