Techniniai dokumentai
Specifikacijos
Backlighting
Yes
Number of Ports
6
Display Colour
Grey
Product Range
Sysmac HMI
Maksimali darbinė temperatūra
+50°C
Display Size
7 in
IP Rating
IP65
Minimali darbinė temperatūra
0°C
Display Type
TFT LCD
Port Type
1 x Serial, 1 x USB Slave, 2 x Ethernet, 2 x USB Host
Supply Voltage
24 V dc
Gylis
69mm
Plotis
236mm
Ilgis
165mm
Markė
OmronPartial Bearing Code
51305
Matmenys
236 x 165 x 69 mm
Kilmės šalis
Netherlands
Produkto aprašymas
Immersion Cartridge Heaters
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 2 432,00
už 1 vnt. (be PVM)
€ 2 942,72
už 1 vnt. (su PVM)
1
€ 2 432,00
už 1 vnt. (be PVM)
€ 2 942,72
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Backlighting
Yes
Number of Ports
6
Display Colour
Grey
Product Range
Sysmac HMI
Maksimali darbinė temperatūra
+50°C
Display Size
7 in
IP Rating
IP65
Minimali darbinė temperatūra
0°C
Display Type
TFT LCD
Port Type
1 x Serial, 1 x USB Slave, 2 x Ethernet, 2 x USB Host
Supply Voltage
24 V dc
Gylis
69mm
Plotis
236mm
Ilgis
165mm
Markė
OmronPartial Bearing Code
51305
Matmenys
236 x 165 x 69 mm
Kilmės šalis
Netherlands
Produkto aprašymas
Immersion Cartridge Heaters
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.