Techniniai dokumentai
Specifikacijos
Markė
MicrochipSupported Protocol
802.11b, 802.11g, 802.11n
Supported Security Standards
WPS
Supported Bus Interfaces
UART
Supply Voltage
3.15 to 3.45V
Matmenys
17.8 x 26.7 x 2.2mm
Aukštis
2.2mm
Ilgis
26.7mm
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Plotis
17.8mm
Produkto aprašymas
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.
WLAN (Wireless Local Area Network) - Microchip Technology
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 19,32
už 1 vnt. (be PVM)
€ 23,38
už 1 vnt. (su PVM)
1
€ 19,32
už 1 vnt. (be PVM)
€ 23,38
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
MicrochipSupported Protocol
802.11b, 802.11g, 802.11n
Supported Security Standards
WPS
Supported Bus Interfaces
UART
Supply Voltage
3.15 to 3.45V
Matmenys
17.8 x 26.7 x 2.2mm
Aukštis
2.2mm
Ilgis
26.7mm
Maksimali darbinė temperatūra
+85 °C
Minimali darbinė temperatūra
-40 °C
Plotis
17.8mm
Produkto aprašymas
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.