Kübler K 07.20 Counter Counter, 7 Digit
Techniniai dokumentai
Specifikacijos
Markė
KüblerCount Mode
Impulses
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Tvirtinimo tipas
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Function
Counter
Cutout Size
30 x 13 mm
Minimali darbinė temperatūra
-10°C
Minimum Measurement
0
Cutout Height
15mm
Serija
K 07.20
Cutout Width
35mm
Gylis
32.7mm
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maksimali darbinė temperatūra
+60°C
Measurement Range
0 → 9999999
Kilmės šalis
Germany
Produkto aprašymas
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 36,57
už 1 vnt. (be PVM)
€ 44,25
už 1 vnt. (su PVM)
1
€ 36,57
už 1 vnt. (be PVM)
€ 44,25
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 36,57 |
| 5 - 9 | € 35,46 |
| 10+ | € 34,00 |
Techniniai dokumentai
Specifikacijos
Markė
KüblerCount Mode
Impulses
Input Type
Voltage
Connection Type
Solder Pin
Reset Method
No Reset
Number Of Digits
7
Tvirtinimo tipas
Panel Mount
Output / Interface
Voltage
Count Direction
Up
Digit Height
4 mm
Function
Counter
Cutout Size
30 x 13 mm
Minimali darbinė temperatūra
-10°C
Minimum Measurement
0
Cutout Height
15mm
Serija
K 07.20
Cutout Width
35mm
Gylis
32.7mm
Meter Type
Electromechanical
Approvals
cULus, RoHS, UL
Maksimali darbinė temperatūra
+60°C
Measurement Range
0 → 9999999
Kilmės šalis
Germany
Produkto aprašymas
Type K07 - micro cumulative counter, 7-digit, front panel mounting
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.