Adafruit 2478, TFT LCD Display 2.4in Resistive Touch Screen Display Module for MicroSD Socket - ILI9341
Techniniai dokumentai
Specifikacijos
Markė
ADAFRUIT INDUSTRIESDiagonal Display Size
2.4in
Display Technology
Resistive Touch Screen
Kit Classification
Display Module
Kit Name
TFT LCD Display
For Use With
MicroSD Socket - ILI9341
Technologija
TFT Display
Classification
LCD Touchscreen
Kilmės šalis
United States
Produkto aprašymas
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
€ 33,44
€ 33,44 už 1 vnt. (be PVM)
€ 40,46
€ 40,46 už 1 vnt. (su PVM)
1
€ 33,44
€ 33,44 už 1 vnt. (be PVM)
€ 40,46
€ 40,46 už 1 vnt. (su PVM)
1
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 33,44 |
| 5 - 9 | € 30,97 |
| 10+ | € 27,46 |
Techniniai dokumentai
Specifikacijos
Markė
ADAFRUIT INDUSTRIESDiagonal Display Size
2.4in
Display Technology
Resistive Touch Screen
Kit Classification
Display Module
Kit Name
TFT LCD Display
For Use With
MicroSD Socket - ILI9341
Technologija
TFT Display
Classification
LCD Touchscreen
Kilmės šalis
United States
Produkto aprašymas
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.