TE Connectivity, DuraSeal Insulated Ring Terminal, M5 Stud Size, 0.5mm² to 1mm² Wire Size, Red
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivitySerija
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Maximum Wire Size mm²
1mm²
Minimum Wire Size mm²
0.5mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Stud Size
M5
Spalva
Red
Contact Plating
Tin
Contact Material
Copper
Overall Length
34.04mm
Kilmės šalis
Mexico
Produkto aprašymas
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 28,50
€ 28,50 1 Box of 25 (be PVM)
€ 34,48
€ 34,48 1 Box of 25 (su PVM)
1
€ 28,50
€ 28,50 1 Box of 25 (be PVM)
€ 34,48
€ 34,48 1 Box of 25 (su PVM)
1
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 28,50 |
| 5 - 24 | € 25,40 |
| 25+ | € 20,50 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivitySerija
Duraseal
Insulation
Insulated
Insulation Material
Nylon
Maximum Wire Size mm²
1mm²
Minimum Wire Size mm²
0.5mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Stud Size
M5
Spalva
Red
Contact Plating
Tin
Contact Material
Copper
Overall Length
34.04mm
Kilmės šalis
Mexico
Produkto aprašymas
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed