
Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsProduct Type
General Purpose Driver
Output Current
0.01mA
Kaiščių skaičius
3
Fall Time
10μs
Pakuotės tipas
SOT-223
Driver Type
MOSFET
Rise Time
10μs
Minimum Supply Voltage
5.5V
Number of Drivers
1
Maximum Supply Voltage
5.5V
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
150°C
Ilgis
6.7mm
Aukštis
1.8mm
Standards/Approvals
No
Mount Type
Surface
Automotive Standard
No
Produkto Aprašymas
The STMicroelectronics VNL5050N3-E are monolithic devices made using VI Power technology, intended for driving resistive or inductive loads with one side connected to the battery. This built-in thermal shutdown protect the chip from over temperature and short-circuit. The output current limitation protect the device in an overload condition. In case of long duration overload, the device limit the dissipated power to a safe level up to thermal shutdown intervention. It has thermal shutdown, with automatic restart, allows the device to recover normal operation as soon as a fault condition disappears. It used fast demagnetization of inductive loads is achieved at turn-off.
Sandėlio informacija laikinai nepasiekiama.
€ 933,00
€ 0,933 Each (On a Reel of 1000) (be PVM)
€ 1 128,93
€ 1,129 Each (On a Reel of 1000) (su PVM)
1000

€ 933,00
€ 0,933 Each (On a Reel of 1000) (be PVM)
€ 1 128,93
€ 1,129 Each (On a Reel of 1000) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1000

Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsProduct Type
General Purpose Driver
Output Current
0.01mA
Kaiščių skaičius
3
Fall Time
10μs
Pakuotės tipas
SOT-223
Driver Type
MOSFET
Rise Time
10μs
Minimum Supply Voltage
5.5V
Number of Drivers
1
Maximum Supply Voltage
5.5V
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
150°C
Ilgis
6.7mm
Aukštis
1.8mm
Standards/Approvals
No
Mount Type
Surface
Automotive Standard
No
Produkto Aprašymas
The STMicroelectronics VNL5050N3-E are monolithic devices made using VI Power technology, intended for driving resistive or inductive loads with one side connected to the battery. This built-in thermal shutdown protect the chip from over temperature and short-circuit. The output current limitation protect the device in an overload condition. In case of long duration overload, the device limit the dissipated power to a safe level up to thermal shutdown intervention. It has thermal shutdown, with automatic restart, allows the device to recover normal operation as soon as a fault condition disappears. It used fast demagnetization of inductive loads is achieved at turn-off.