Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsProduct Type
General Purpose Driver
Output Current
30A
Kaiščių skaičius
6
Fall Time
53μs
Pakuotės tipas
HPAK
Driver Type
MOSFET
Number of Outputs
5
Rise Time
55μs
Minimum Supply Voltage
36V
Number of Drivers
1
Maximum Supply Voltage
36V
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
150°C
Ilgis
6.6mm
Aukštis
2.4mm
Standards/Approvals
No
Plotis
6.2mm
Mount Type
Surface
Automotive Standard
AEC-Q100
Produkto Aprašymas
The STMicroelectronics VN5T016AH-E is a device made using VI Power technology, intended for driving resistive or inductive loads with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCC are reported via the current sense pin. Its output current limitation protects the device in overload condition.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Sandėlio informacija laikinai nepasiekiama.
€ 18,50
€ 3,70 Each (In a Pack of 5) (be PVM)
€ 22,38
€ 4,477 Each (In a Pack of 5) (su PVM)
Standartas
5
€ 18,50
€ 3,70 Each (In a Pack of 5) (be PVM)
€ 22,38
€ 4,477 Each (In a Pack of 5) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
Standartas
5
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsProduct Type
General Purpose Driver
Output Current
30A
Kaiščių skaičius
6
Fall Time
53μs
Pakuotės tipas
HPAK
Driver Type
MOSFET
Number of Outputs
5
Rise Time
55μs
Minimum Supply Voltage
36V
Number of Drivers
1
Maximum Supply Voltage
36V
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
150°C
Ilgis
6.6mm
Aukštis
2.4mm
Standards/Approvals
No
Plotis
6.2mm
Mount Type
Surface
Automotive Standard
AEC-Q100
Produkto Aprašymas
The STMicroelectronics VN5T016AH-E is a device made using VI Power technology, intended for driving resistive or inductive loads with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCC are reported via the current sense pin. Its output current limitation protects the device in overload condition.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
