Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsProduct Type
Power Switch IC
Switch On Resistance RdsOn
0.2Ω
Number of Inputs
1
Mount Type
Surface
Minimum Supply Voltage
1V
Pakuotės tipas
SO
Kaiščių skaičius
10
Maximum Supply Voltage
36V
Operating Current
1A
Maksimali darbinė temperatūra
125°C
Minimali darbinė temperatūra
-40°C
Ilgis
9.47mm
Aukštis
3.3mm
Standards/Approvals
IEC 61131-2
Automotive Standard
No
Produkto Aprašymas
The VN340SP-33-E is a monolithic device developed using STMicroelectronics VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when the overtemperature condition of the relative channel is verified.
Sandėlio informacija laikinai nepasiekiama.
€ 3 000,00
€ 5,00 Each (On a Reel of 600) (be PVM)
€ 3 630,00
€ 6,05 Each (On a Reel of 600) (su PVM)
600

€ 3 000,00
€ 5,00 Each (On a Reel of 600) (be PVM)
€ 3 630,00
€ 6,05 Each (On a Reel of 600) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
600

Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsProduct Type
Power Switch IC
Switch On Resistance RdsOn
0.2Ω
Number of Inputs
1
Mount Type
Surface
Minimum Supply Voltage
1V
Pakuotės tipas
SO
Kaiščių skaičius
10
Maximum Supply Voltage
36V
Operating Current
1A
Maksimali darbinė temperatūra
125°C
Minimali darbinė temperatūra
-40°C
Ilgis
9.47mm
Aukštis
3.3mm
Standards/Approvals
IEC 61131-2
Automotive Standard
No
Produkto Aprašymas
The VN340SP-33-E is a monolithic device developed using STMicroelectronics VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when the overtemperature condition of the relative channel is verified.