STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Name: STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin
Brand: STMicroelectronics
SKU: 1908454
Availability: LimitedAvailability

RS kodas: 190-8454Gamintojas: STMicroelectronicsGamintojo kodas: STTS751-1DP3F

Žiūrėti viską Temperatūros jutiklių integriniai grandynai

Techniniai Dokumentai

Specifikacijos

Markė

STMicroelectronics

Product Type

Temperature & Humidity Sensor

Output Type

Digital

Sub Type

Temperature Sensor

Interface Type

SMBus

Accuracy

±2.5 %

Mount Type

Surface

Kaiščių skaičius

Maksimali darbinė temperatūra

125°C

Minimali darbinė temperatūra

-40°C

Minimum Supply Voltage

2.25V

Maximum Supply Voltage

3.6V

Pakuotės tipas

UDFN

Ilgis

2.05mm

Aukštis

0.5mm

Standards/Approvals

Serija

MCP9701T

Automotive Standard

Produkto Aprašymas

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Žiūrėti viską Temperatūros jutiklių integriniai grandynai

Sandėlio informacija laikinai nepasiekiama.

€ 2 262,00

€ 0,754 Each (On a Reel of 3000) (be PVM)

€ 2 737,02

€ 0,912 Each (On a Reel of 3000) (su PVM)

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

€ 2 262,00

€ 0,754 Each (On a Reel of 3000) (be PVM)

€ 2 737,02

€ 0,912 Each (On a Reel of 3000) (su PVM)

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Sandėlio informacija laikinai nepasiekiama.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Techniniai Dokumentai

Specifikacijos

Markė

STMicroelectronics

Product Type

Temperature & Humidity Sensor

Output Type

Digital

Sub Type

Temperature Sensor

Interface Type

SMBus

Accuracy

±2.5 %

Mount Type

Surface

Kaiščių skaičius

Maksimali darbinė temperatūra

125°C

Minimali darbinė temperatūra

-40°C

Minimum Supply Voltage

2.25V

Maximum Supply Voltage

3.6V

Pakuotės tipas

UDFN

Ilgis

2.05mm

Aukštis

0.5mm

Standards/Approvals

Serija

MCP9701T

Automotive Standard

Produkto Aprašymas

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more