Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Kaiščių skaičius
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
150°C
Standards/Approvals
No
Serija
L6364
Ilgis
2.57mm
Aukštis
0.47mm
Automotive Standard
No
Supply Current
50mA
Produkto Aprašymas
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
Sandėlio informacija laikinai nepasiekiama.
€ 5,80
€ 5,80 už 1 vnt. (be PVM)
€ 7,02
€ 7,02 už 1 vnt. (su PVM)
Standartas
1
€ 5,80
€ 5,80 už 1 vnt. (be PVM)
€ 7,02
€ 7,02 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
Standartas
1
Techniniai Dokumentai
Specifikacijos
Markė
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Kaiščių skaičius
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimali darbinė temperatūra
-40°C
Maksimali darbinė temperatūra
150°C
Standards/Approvals
No
Serija
L6364
Ilgis
2.57mm
Aukštis
0.47mm
Automotive Standard
No
Supply Current
50mA
Produkto Aprašymas
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
