Techniniai Dokumentai
Specifikacijos
Markė
Renesas ElectronicsProduct Type
Clock Buffer
Maximum Input Frequency
133MHz
Maximum Propagation Delay Time
250ps
Mount Type
Surface
Pakuotės tipas
SOIC
Kaiščių skaičius
8
Minimum Supply Voltage
3V
Maximum Supply Voltage
3.6V
Minimali darbinė temperatūra
0°C
Maksimali darbinė temperatūra
70°C
Ilgis
5mm
Aukštis
1.75mm
Standards/Approvals
No
Serija
2305-1DCG
Automotive Standard
No
Produkto Aprašymas
The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.
Sandėlio informacija laikinai nepasiekiama.
€ 89,43
€ 0,922 Each (In a Tube of 97) (be PVM)
€ 108,21
€ 1,116 Each (In a Tube of 97) (su PVM)
97

€ 89,43
€ 0,922 Each (In a Tube of 97) (be PVM)
€ 108,21
€ 1,116 Each (In a Tube of 97) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
97

| kiekis | Vieneto kaina | Per Vamzdelis |
|---|---|---|
| 97 - 97 | € 0,922 | € 89,43 |
| 194 - 485 | € 0,835 | € 81,00 |
| 582 - 970 | € 0,812 | € 78,76 |
| 1067 - 2425 | € 0,792 | € 76,82 |
| 2522+ | € 0,772 | € 74,88 |
Techniniai Dokumentai
Specifikacijos
Markė
Renesas ElectronicsProduct Type
Clock Buffer
Maximum Input Frequency
133MHz
Maximum Propagation Delay Time
250ps
Mount Type
Surface
Pakuotės tipas
SOIC
Kaiščių skaičius
8
Minimum Supply Voltage
3V
Maximum Supply Voltage
3.6V
Minimali darbinė temperatūra
0°C
Maksimali darbinė temperatūra
70°C
Ilgis
5mm
Aukštis
1.75mm
Standards/Approvals
No
Serija
2305-1DCG
Automotive Standard
No
Produkto Aprašymas
The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.