Techniniai Dokumentai
Specifikacijos
Markė
PR ElectronicsProduct Type
Frequency/Current Converter
Input Signal Type
Frequency
Output Signal Type
Digital
Input Range
0.001 → 100000 Hz
Isolation
2.5kV ac
Supply Voltage
16.8, 31.2V
Hazardous Area Certification
ATEX
Mount Type
DIN Rail
Maksimali darbinė temperatūra
70°C
Minimali darbinė temperatūra
-25°C
Terminal Type
Screw
IP Rating
IP20
Signal Conditioner Type
Frequency to Current
Standards/Approvals
RoHS, CE
Serija
3225
Kilmės šalis
Denmark
Produkto Aprašymas
The PR Electronics Universal Frequency Converter units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature. All programming can be password protected. All terminals are over-voltage protected, polarity protected and short-circuit protected. The device is provided with field wiring terminals and shall be supplied from a power supply having double / reinforced. Insulation. a power switch should be easily accessible and close to the device. the power switch shall be marked as the disconnecting unit for the device.
Sandėlio informacija laikinai nepasiekiama.
€ 332,00
€ 332,00 už 1 vnt. (be PVM)
€ 401,72
€ 401,72 už 1 vnt. (su PVM)
1
€ 332,00
€ 332,00 už 1 vnt. (be PVM)
€ 401,72
€ 401,72 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1
Techniniai Dokumentai
Specifikacijos
Markė
PR ElectronicsProduct Type
Frequency/Current Converter
Input Signal Type
Frequency
Output Signal Type
Digital
Input Range
0.001 → 100000 Hz
Isolation
2.5kV ac
Supply Voltage
16.8, 31.2V
Hazardous Area Certification
ATEX
Mount Type
DIN Rail
Maksimali darbinė temperatūra
70°C
Minimali darbinė temperatūra
-25°C
Terminal Type
Screw
IP Rating
IP20
Signal Conditioner Type
Frequency to Current
Standards/Approvals
RoHS, CE
Serija
3225
Kilmės šalis
Denmark
Produkto Aprašymas
The PR Electronics Universal Frequency Converter units can be mounted side by side, horizontally and vertically, without air gap on a standard DIN rail, even at 70°C ambient temperature. All programming can be password protected. All terminals are over-voltage protected, polarity protected and short-circuit protected. The device is provided with field wiring terminals and shall be supplied from a power supply having double / reinforced. Insulation. a power switch should be easily accessible and close to the device. the power switch shall be marked as the disconnecting unit for the device.
