Techniniai Dokumentai
Specifikacijos
Markė
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 18 V ac
Number of Outputs
2
Secondary Current
1.25A
Weight
300g
Power
15VA
Diameter
60mm
Minimum Operating Frequency
50Hz
Minimali darbinė temperatūra
0°C
Maximum Operating Frequency
60Hz
Maksimali darbinė temperatūra
180°C
Termination Type
Copper Conductor Termination Wire
Aukštis
31mm
Standards/Approvals
UL5, UL506, VDE0550, EN60065, BS415, EN61558
Produkto Aprašymas
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Sandėlio informacija laikinai nepasiekiama.
€ 54,00
€ 54,00 už 1 vnt. (be PVM)
€ 65,34
€ 65,34 už 1 vnt. (su PVM)
1

€ 54,00
€ 54,00 už 1 vnt. (be PVM)
€ 65,34
€ 65,34 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1

| kiekis | Vieneto kaina |
|---|---|
| 1 - 9 | € 54,00 |
| 10 - 24 | € 51,00 |
| 25 - 49 | € 45,50 |
| 50 - 74 | € 40,10 |
| 75+ | € 34,70 |
Techniniai Dokumentai
Specifikacijos
Markė
Nuvotem TalemaProduct Type
Toroidal Transformer
Primary Voltage
230 V ac
Secondary Voltage
2 x 18 V ac
Number of Outputs
2
Secondary Current
1.25A
Weight
300g
Power
15VA
Diameter
60mm
Minimum Operating Frequency
50Hz
Minimali darbinė temperatūra
0°C
Maximum Operating Frequency
60Hz
Maksimali darbinė temperatūra
180°C
Termination Type
Copper Conductor Termination Wire
Aukštis
31mm
Standards/Approvals
UL5, UL506, VDE0550, EN60065, BS415, EN61558
Produkto Aprašymas
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
UL 506; EN 61558
UL 506; EN 61558
Full mounting kit
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.