Techniniai Dokumentai
Specifikacijos
Markė
MicrochipProduct Type
Ethernet Switch IC
Sub Type
Switch
Communication Mode
Full Duplex/Half Duplex
Loopback Mode
Internal
Interface Type
RGMII
Number of Ports
7
Standard Supported
IEEE 802.3
Mount Type
Surface
Pakuotės tipas
TQFP
Kaiščių skaičius
128
Maximum Supply Voltage
3.3V
Minimali darbinė temperatūra
0°C
Maksimali darbinė temperatūra
70°C
Minimum Supply Voltage
1.8V
Aukštis
1.2mm
Ilgis
16mm
Standards/Approvals
No
Plotis
16mm
Supply Current
750mA
Automotive Standard
No
Produkto Aprašymas
The KSZ9897 is a fully integrated layer 2, managed, seven-port gigabit Ethernet switch with numerous Advanced features. Five of the seven ports incorporate 10/100/1000 Mbps PHYs. The other two ports have interfaces that can be configured as SGMII, RGMII, MII or RMII. Either of these may connect directly to a host processor or to an external PHY. Full register access is available by SPI or I2C interfaces, and by optional in-band management via any of the data ports.
Sandėlio informacija laikinai nepasiekiama.
€ 1 161,00
€ 12,90 Each (In a Tray of 90) (be PVM)
€ 1 404,81
€ 15,609 Each (In a Tray of 90) (su PVM)
90

€ 1 161,00
€ 12,90 Each (In a Tray of 90) (be PVM)
€ 1 404,81
€ 15,609 Each (In a Tray of 90) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
90

Techniniai Dokumentai
Specifikacijos
Markė
MicrochipProduct Type
Ethernet Switch IC
Sub Type
Switch
Communication Mode
Full Duplex/Half Duplex
Loopback Mode
Internal
Interface Type
RGMII
Number of Ports
7
Standard Supported
IEEE 802.3
Mount Type
Surface
Pakuotės tipas
TQFP
Kaiščių skaičius
128
Maximum Supply Voltage
3.3V
Minimali darbinė temperatūra
0°C
Maksimali darbinė temperatūra
70°C
Minimum Supply Voltage
1.8V
Aukštis
1.2mm
Ilgis
16mm
Standards/Approvals
No
Plotis
16mm
Supply Current
750mA
Automotive Standard
No
Produkto Aprašymas
The KSZ9897 is a fully integrated layer 2, managed, seven-port gigabit Ethernet switch with numerous Advanced features. Five of the seven ports incorporate 10/100/1000 Mbps PHYs. The other two ports have interfaces that can be configured as SGMII, RGMII, MII or RMII. Either of these may connect directly to a host processor or to an external PHY. Full register access is available by SPI or I2C interfaces, and by optional in-band management via any of the data ports.