Techniniai Dokumentai
Specifikacijos
Markė
MicrochipProduct Type
Analogue Switch
Logic Family
CMOS
Kaiščių skaičius
48
Number of Elements per Chip
1
Mount Type
Surface
Minimum Supply Voltage
4.5V
Pakuotės tipas
LQFP
Maximum Supply Voltage
6.3V
Maximum On State Resistance
23Ω
Minimali darbinė temperatūra
0°C
Multiplexer/Demultiplexer
Multiplexer
Maksimali darbinė temperatūra
70°C
Ilgis
7mm
Aukštis
1mm
Standards/Approvals
RoHS
Serija
HV2707
Automotive Standard
No
Produkto Aprašymas
The Microchip HV2707 device is a low harmonic distortion, low charge injection, 16-channel, high voltage analogue switch without high-voltage supplies. It is intended for use in applications requiring high-voltage switching controlled by low-voltage control signals, such as medical ultrasound imaging, driving piezoelectric transducers and printers. The device requires only +5V or +6V bias supply.
Sandėlio informacija laikinai nepasiekiama.
€ 20 800,00
€ 20,80 Each (On a Reel of 1000) (be PVM)
€ 25 168,00
€ 25,168 Each (On a Reel of 1000) (su PVM)
1000

€ 20 800,00
€ 20,80 Each (On a Reel of 1000) (be PVM)
€ 25 168,00
€ 25,168 Each (On a Reel of 1000) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1000

Techniniai Dokumentai
Specifikacijos
Markė
MicrochipProduct Type
Analogue Switch
Logic Family
CMOS
Kaiščių skaičius
48
Number of Elements per Chip
1
Mount Type
Surface
Minimum Supply Voltage
4.5V
Pakuotės tipas
LQFP
Maximum Supply Voltage
6.3V
Maximum On State Resistance
23Ω
Minimali darbinė temperatūra
0°C
Multiplexer/Demultiplexer
Multiplexer
Maksimali darbinė temperatūra
70°C
Ilgis
7mm
Aukštis
1mm
Standards/Approvals
RoHS
Serija
HV2707
Automotive Standard
No
Produkto Aprašymas
The Microchip HV2707 device is a low harmonic distortion, low charge injection, 16-channel, high voltage analogue switch without high-voltage supplies. It is intended for use in applications requiring high-voltage switching controlled by low-voltage control signals, such as medical ultrasound imaging, driving piezoelectric transducers and printers. The device requires only +5V or +6V bias supply.