Techniniai Dokumentai
Specifikacijos
Markė
HartingProduct Type
Hinged Frame
Accessory Type
Metal Frame
Size
16B
Cable Entry Angle
Top
Spalva
Grey
Kontaktų skaičius
2
Serija
HAN Modular
For Use With
Standard Han Hoods and Housings
Medžiaga
Die Cast Zinc
Standards/Approvals
CSA, DNV GL, UL
Thread Size
M3
Minimum Wire Size mm²
4mm²
Maximum Wire Size mm²
10mm²
Kilmės šalis
Germany
Produkto Aprašymas
This hinged frame provides a metal mounting solution for four-module connector assemblies in industrial environments. Designed for TOP cable entry and compatible with standard Han hoods and housings, it offers a Compact Interface for modular connector configurations. The die-cast zinc construction and grey finish suit heavy-duty applications where robust mechanical support and predictable mating performance are required.
The accessory accepts PE conductor cross-sections from 4mm² up to 10mm².
The frame is rated to operate between -40°C and +125°C.
It holds approvals from CSA, DNV GL and UL for connector accessories.
Conductors should be stripped to a length of 8mm to 10mm.
Use a slotted 0.6 x 3.5mm or a PH2 screwdriver for the fastening screws.
The 1 module is for use with hoods and housings from range 2 – the Harting 10A Series (see stock no. 181-0662 which is typical of that range)
Sandėlio informacija laikinai nepasiekiama.
€ 29,90
€ 29,90 už 1 vnt. (be PVM)
€ 36,18
€ 36,18 už 1 vnt. (su PVM)
1

€ 29,90
€ 29,90 už 1 vnt. (be PVM)
€ 36,18
€ 36,18 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1

Techniniai Dokumentai
Specifikacijos
Markė
HartingProduct Type
Hinged Frame
Accessory Type
Metal Frame
Size
16B
Cable Entry Angle
Top
Spalva
Grey
Kontaktų skaičius
2
Serija
HAN Modular
For Use With
Standard Han Hoods and Housings
Medžiaga
Die Cast Zinc
Standards/Approvals
CSA, DNV GL, UL
Thread Size
M3
Minimum Wire Size mm²
4mm²
Maximum Wire Size mm²
10mm²
Kilmės šalis
Germany
Produkto Aprašymas
This hinged frame provides a metal mounting solution for four-module connector assemblies in industrial environments. Designed for TOP cable entry and compatible with standard Han hoods and housings, it offers a Compact Interface for modular connector configurations. The die-cast zinc construction and grey finish suit heavy-duty applications where robust mechanical support and predictable mating performance are required.
The accessory accepts PE conductor cross-sections from 4mm² up to 10mm².
The frame is rated to operate between -40°C and +125°C.
It holds approvals from CSA, DNV GL and UL for connector accessories.
Conductors should be stripped to a length of 8mm to 10mm.
Use a slotted 0.6 x 3.5mm or a PH2 screwdriver for the fastening screws.
The 1 module is for use with hoods and housings from range 2 – the Harting 10A Series (see stock no. 181-0662 which is typical of that range)