Techniniai Dokumentai
Specifikacijos
Markė
Electro PjpProduct Type
Phase Rotation Tester
Connection Type
Test Lead
Overvoltage Category
230 V CAT IV
Weight
390g
Minimali darbinė temperatūra
-10°C
Maksimali darbinė temperatūra
50°C
Ilgis
1.5m
Standards/Approvals
européenne « Basse Tension » 2014/35/UE, européenne « RoHS », EN / CEI 60529, EN / CEI 61010031:2015, européenne 2015/863/UE, Règlement européen « REACH » n°1907 / 2006
Minimum Voltage
230V
Maximum Voltage
400V
Kilmės šalis
France
Produkto Aprašymas
The Electro PJP CPI controller having a set of one IMD test box and two IP2X fused probes leads. It is used for checking the permanent insulation monitors (CPI) of IT earthing systems. The CPI-Test385A offers electrical resistances of 385 ohms, 770 ohms, 3.5k ohms, and 85.5k ohms between its black 4 mm banana terminal and its other 4 mm banana terminals. The "low" resistors are used to simulate a fault and thus cause the CPI to react.
Sandėlio informacija laikinai nepasiekiama.
€ 407,54
€ 407,54 už 1 vnt. (be PVM)
€ 493,12
€ 493,12 už 1 vnt. (su PVM)
1
€ 407,54
€ 407,54 už 1 vnt. (be PVM)
€ 493,12
€ 493,12 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1
Techniniai Dokumentai
Specifikacijos
Markė
Electro PjpProduct Type
Phase Rotation Tester
Connection Type
Test Lead
Overvoltage Category
230 V CAT IV
Weight
390g
Minimali darbinė temperatūra
-10°C
Maksimali darbinė temperatūra
50°C
Ilgis
1.5m
Standards/Approvals
européenne « Basse Tension » 2014/35/UE, européenne « RoHS », EN / CEI 60529, EN / CEI 61010031:2015, européenne 2015/863/UE, Règlement européen « REACH » n°1907 / 2006
Minimum Voltage
230V
Maximum Voltage
400V
Kilmės šalis
France
Produkto Aprašymas
The Electro PJP CPI controller having a set of one IMD test box and two IP2X fused probes leads. It is used for checking the permanent insulation monitors (CPI) of IT earthing systems. The CPI-Test385A offers electrical resistances of 385 ohms, 770 ohms, 3.5k ohms, and 85.5k ohms between its black 4 mm banana terminal and its other 4 mm banana terminals. The "low" resistors are used to simulate a fault and thus cause the CPI to react.
