Techniniai Dokumentai
Specifikacijos
Markė
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Technologija
Chopper Stabilised BiCMOS
Mount Type
Through Hole
Magnetic Type
Bipolar
Maximum Frequency Response
800kHz
Minimum Supply Voltage
3V
Pakuotės tipas
SIP
Maximum Supply Voltage
24V
Minimali darbinė temperatūra
-40°C
Kaiščių skaičius
3
Maksimali darbinė temperatūra
150°C
Aukštis
3.02mm
Ilgis
4.09mm
Standards/Approvals
Lead (Pb) Free
Plotis
1.52mm
Serija
A122
Supply Current
4mA
Automotive Standard
AEC-Q100
Response Time
25μs
Produkto Aprašymas
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Sandėlio informacija laikinai nepasiekiama.
€ 438,50
€ 0,877 Each (In a Bag of 500) (be PVM)
€ 530,58
€ 1,061 Each (In a Bag of 500) (su PVM)
500

€ 438,50
€ 0,877 Each (In a Bag of 500) (be PVM)
€ 530,58
€ 1,061 Each (In a Bag of 500) (su PVM)
Sandėlio informacija laikinai nepasiekiama.
500

Techniniai Dokumentai
Specifikacijos
Markė
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Technologija
Chopper Stabilised BiCMOS
Mount Type
Through Hole
Magnetic Type
Bipolar
Maximum Frequency Response
800kHz
Minimum Supply Voltage
3V
Pakuotės tipas
SIP
Maximum Supply Voltage
24V
Minimali darbinė temperatūra
-40°C
Kaiščių skaičius
3
Maksimali darbinė temperatūra
150°C
Aukštis
3.02mm
Ilgis
4.09mm
Standards/Approvals
Lead (Pb) Free
Plotis
1.52mm
Serija
A122
Supply Current
4mA
Automotive Standard
AEC-Q100
Response Time
25μs
Produkto Aprašymas
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.