Microchip Evaluation Board Switches & Multiplexer Development Kit MCP402XEV
Techniniai dokumentai
Specifikacijos
Markė
MicrochipKit Name
Non-Volatile Digital Potentiometer
Produkto aprašymas
MCP402X Non-Volatile Digital Potentiometer Evaluation Board
The MCP402xEV is a low cost evaluation board that quickly enables the user to exercise all of the features of the MCP402X Non-Volatile Digital Potentiometer. This kit includes 2 PCBs, one populated & one unpopulated. The populated PCB has an MCP4021-103E/SN digital pot configured as a “windowed” potentiometer using a 2.5kΩ pull-up and a 2.5kΩ pull-down resistor. The PCB supports the 8 pin SOIC, SOT-23-6 and SOT-23-5 MCP402X package variations. A 6 pin PIC10F206-I/OT with FLASH memory is utilized to generate all of the Low-Voltage (LV) and High-Voltage (HV) MCP402X serial commands when the 2 momentary switches are depressed in various sequences. This enables the user to Increment and Decrement the wiper, save the setting to EEPROM & exercise the WiperLocktm feature. The PCB also supports the standard ICSP programming header used by the Microchip BFMP low cost programming tool.
Digital Potentiometer - Microchip
€ 33,70
€ 33,70 už 1 vnt. (be PVM)
€ 40,78
€ 40,78 už 1 vnt. (su PVM)
1
€ 33,70
€ 33,70 už 1 vnt. (be PVM)
€ 40,78
€ 40,78 už 1 vnt. (su PVM)
Sandėlio informacija laikinai nepasiekiama.
1
Sandėlio informacija laikinai nepasiekiama.
Techniniai dokumentai
Specifikacijos
Markė
MicrochipKit Name
Non-Volatile Digital Potentiometer
Produkto aprašymas
MCP402X Non-Volatile Digital Potentiometer Evaluation Board
The MCP402xEV is a low cost evaluation board that quickly enables the user to exercise all of the features of the MCP402X Non-Volatile Digital Potentiometer. This kit includes 2 PCBs, one populated & one unpopulated. The populated PCB has an MCP4021-103E/SN digital pot configured as a “windowed” potentiometer using a 2.5kΩ pull-up and a 2.5kΩ pull-down resistor. The PCB supports the 8 pin SOIC, SOT-23-6 and SOT-23-5 MCP402X package variations. A 6 pin PIC10F206-I/OT with FLASH memory is utilized to generate all of the Low-Voltage (LV) and High-Voltage (HV) MCP402X serial commands when the 2 momentary switches are depressed in various sequences. This enables the user to Increment and Decrement the wiper, save the setting to EEPROM & exercise the WiperLocktm feature. The PCB also supports the standard ICSP programming header used by the Microchip BFMP low cost programming tool.