Phoenix Contact 3RS7003 Series Signal Conditioner, Current, Voltage Input, Current Output, 24V dc Supply, ATEX
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Serija
3RS7003
Number of Channels
2
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+60°C
Distrelec Product Id
17689715
Kilmės šalis
Germany
Produkto aprašymas
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.
€ 312,00
€ 312,00 už 1 vnt. (be PVM)
€ 377,52
€ 377,52 už 1 vnt. (su PVM)
1
€ 312,00
€ 312,00 už 1 vnt. (be PVM)
€ 377,52
€ 377,52 už 1 vnt. (su PVM)
1
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Isolation Amplifier
Input Signal Type
Current, Voltage
Output Signal Type
Current
Input Range
0 → 10 V, 0 → 20mA
Output Range
0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +60°C
Serija
3RS7003
Number of Channels
2
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+60°C
Distrelec Product Id
17689715
Kilmės šalis
Germany
Produkto aprašymas
4-way Isolated Signal Duplicator
Phoenix Contacts signal duplicator is a great conditioner for isolation and duplication of analog signals. The 2864176 is a mini 6.2mm width & is easily installed via a DIN rail mount with an option to connect to a TBUS DIN rail connector. This signal duplicator is backed by an Ex-zone 2 rating allowing it to be installed in potentially explosive areas.
2864176 also has a diagnostic LED located on the front. A red LED will flash if there is an error with the device.