Weidmuller 0128360000 SAK Series Beige, Yellow, 4mm², Single-Level, Feed Through Termination, ATEX, IECEx
Techniniai dokumentai
Specifikacijos
Markė
WeidmüllerSpalva
Beige, Yellow
Number of Levels
Single
Serija
SAK
American Wire Gauge
26 → 10AWG
Užbaigimo būdas
Feed Through
Cable CSA
4mm²
Įtampos reitingas
800 V
Srovės įvertinimas
32A
Minimali darbinė temperatūra
-50°C
Maksimali darbinė temperatūra
+100°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
IEC 60947-7-1
Distrelec Product Id
30399995
Kilmės šalis
Romania
Produkto aprašymas
Standard Terminals, End Covers, and Jumper Bars
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Approvals
CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO
SAK Series
Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting
€ 15,68
€ 1,568 Each (In a Pack of 10) (be PVM)
€ 18,97
€ 1,897 Each (In a Pack of 10) (su PVM)
10
€ 15,68
€ 1,568 Each (In a Pack of 10) (be PVM)
€ 18,97
€ 1,897 Each (In a Pack of 10) (su PVM)
10
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
Techniniai dokumentai
Specifikacijos
Markė
WeidmüllerSpalva
Beige, Yellow
Number of Levels
Single
Serija
SAK
American Wire Gauge
26 → 10AWG
Užbaigimo būdas
Feed Through
Cable CSA
4mm²
Įtampos reitingas
800 V
Srovės įvertinimas
32A
Minimali darbinė temperatūra
-50°C
Maksimali darbinė temperatūra
+100°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
IEC 60947-7-1
Distrelec Product Id
30399995
Kilmės šalis
Romania
Produkto aprašymas
Standard Terminals, End Covers, and Jumper Bars
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Approvals
CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO
SAK Series
Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting