TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Medžiaga
Polyolefin
Įtampos reitingas
600 V
Minimali darbinė temperatūra
-5°C
Maksimali darbinė temperatūra
+125°C
Spalva
Blue
Serija
D-110
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Kilmės šalis
Mexico
Produkto aprašymas
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 1,188
Each (In a Pack of 500) (be PVM)
€ 1,437
Each (In a Pack of 500) (su PVM)
500
€ 1,188
Each (In a Pack of 500) (be PVM)
€ 1,437
Each (In a Pack of 500) (su PVM)
500
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Pakuotė |
|---|---|---|
| 500 - 7000 | € 1,188 | € 593,75 |
| 7500 - 24500 | € 1,14 | € 570,00 |
| 25000+ | € 1,092 | € 546,25 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Medžiaga
Polyolefin
Įtampos reitingas
600 V
Minimali darbinė temperatūra
-5°C
Maksimali darbinė temperatūra
+125°C
Spalva
Blue
Serija
D-110
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Kilmės šalis
Mexico
Produkto aprašymas
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.