TE Connectivity Transparent Polyolefin Solder Sleeve 24.5mm Length 1 → 3mm Cable Diameter
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityMinimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Sleeve Length
24.5mm
Medžiaga
Polyolefin
Minimali darbinė temperatūra
-55°C
Maksimali darbinė temperatūra
+125°C
Quantity
1
Spalva
Transparent
Serija
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Kilmės šalis
Mexico
Produkto aprašymas
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,881
Each (In a Pack of 100) (be PVM)
€ 1,066
Each (In a Pack of 100) (su PVM)
100
€ 0,881
Each (In a Pack of 100) (be PVM)
€ 1,066
Each (In a Pack of 100) (su PVM)
100
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Pakuotė |
|---|---|---|
| 100 - 1400 | € 0,881 | € 88,06 |
| 1500 - 4900 | € 0,837 | € 83,70 |
| 5000+ | € 0,791 | € 79,14 |
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityMinimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Sleeve Length
24.5mm
Medžiaga
Polyolefin
Minimali darbinė temperatūra
-55°C
Maksimali darbinė temperatūra
+125°C
Quantity
1
Spalva
Transparent
Serija
B-155
Shrink Temperature
+85°C
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Kilmės šalis
Mexico
Produkto aprašymas
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.