RS PRO Stepper Motor, 1.76Nm Torque, 5.1 V, 1.8°, 56.4 x 56.4mm Frame, 6.35mm Shaft

RS kodas: 798-3643Gamintojas: RS PRO
brand-logo
Žiūrėti viską Žingsniniai varikliai

Techniniai dokumentai

Specifikacijos

Markė

RS Pro

Step Angle

1.8°

Holding Torque

1.76Nm

Number Of Wires

6

Supply Voltage

5.1 V

Frame Size

56.4 x 56.4mm

Shaft Diameter

6.35mm

Srovės įvertinimas

3 A

Winding Arrangement

Unipolar

Shaft Length

139.6mm

Gylis

103mm

Resistance Per Phase

1.7Ω

Standards Met

RoHS Compliant

Kilmės šalis

Taiwan, Province Of China

Produkto aprašymas

Stepper Motors With/Without Rear Shaft Extensions

RS Pro stepper motors with 6 or 8 lead configuration.

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 57,00

už 1 vnt. (be PVM)

€ 68,97

už 1 vnt. (su PVM)

RS PRO Stepper Motor, 1.76Nm Torque, 5.1 V, 1.8°, 56.4 x 56.4mm Frame, 6.35mm Shaft
sticker-462

€ 57,00

už 1 vnt. (be PVM)

€ 68,97

už 1 vnt. (su PVM)

RS PRO Stepper Motor, 1.76Nm Torque, 5.1 V, 1.8°, 56.4 x 56.4mm Frame, 6.35mm Shaft
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Markė

RS Pro

Step Angle

1.8°

Holding Torque

1.76Nm

Number Of Wires

6

Supply Voltage

5.1 V

Frame Size

56.4 x 56.4mm

Shaft Diameter

6.35mm

Srovės įvertinimas

3 A

Winding Arrangement

Unipolar

Shaft Length

139.6mm

Gylis

103mm

Resistance Per Phase

1.7Ω

Standards Met

RoHS Compliant

Kilmės šalis

Taiwan, Province Of China

Produkto aprašymas

Stepper Motors With/Without Rear Shaft Extensions

RS Pro stepper motors with 6 or 8 lead configuration.

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: