RS PRO Signal Conditioner, Current Input, Relay Output, 10 → 30V dc Supply
Techniniai dokumentai
Specifikacijos
Markė
RS ProModule Type
Trip Amplifier
Input Signal Type
Current
Output Signal Type
Relay
Input Range
4 → 20mA
Supply Voltage
10 → 30V dc
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
0 → +50°C
Serija
9100
Minimali darbinė temperatūra
0°C
Maksimali darbinė temperatūra
+50°C
Termination
Screw
Kilmės šalis
United Kingdom
Produkto aprašymas
24Vdc Trip Amplifiers, Signal Isolator/Converters
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 257,45
už 1 vnt. (be PVM)
€ 311,51
už 1 vnt. (su PVM)
1
€ 257,45
už 1 vnt. (be PVM)
€ 311,51
už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
RS ProModule Type
Trip Amplifier
Input Signal Type
Current
Output Signal Type
Relay
Input Range
4 → 20mA
Supply Voltage
10 → 30V dc
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
0 → +50°C
Serija
9100
Minimali darbinė temperatūra
0°C
Maksimali darbinė temperatūra
+50°C
Termination
Screw
Kilmės šalis
United Kingdom
Produkto aprašymas
24Vdc Trip Amplifiers, Signal Isolator/Converters
Symmetric DIN rail mounting units with finger protected terminals designed for use in process control and instrumentation applications. Single or dual level trip amplifiers from a single Input.Each trip can be arranged so that the alarm condition can be above (high trip) or below (low trip) the set point, and that the relay can be either normally energised to de-energise in the alarm condition (fail-safe), or normally de-energised to energise in the alarm condition (non fail-safe).,signal Isolators/converter; this unit conditions the signal before sending it through an opto-isolated hybrid circuit. Input and output stages are power from separate secondaries of the dc/dc inverter to provide 3 port isolation