Techniniai dokumentai
Specifikacijos
Markė
RS ProAdhesive Type
Acrylic Adhesive
Application
Sealing
Material Compatibility
Metal, Plastic
Spalva
Red
Product Form
Liquid
Pakuotės tipas
Syringe
Package Size
10 ml
Cure Time
1 h
Viscosity Measurement
1450mPa/s
Maksimali darbinė temperatūra
+140°C
Special Features
Solvent Resistant
Chemical Composition
Aliphatic Amines, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether
Specific Gravity
1.16
Kilmės šalis
United Kingdom
Produkto aprašymas
RS Pro Heat Cured SMT Adhesive
Our RS Pro range of heat cured SMT Adhesive is a one part thixotropic paste adhesive that will provide a great bond for the protection of electronic components by either dipping or “glob topping. It packs a punch in great “green strength” or stickiness to ensure that the components do not move during handling. With the adhesive being supplied in a syringe, it makes for effortless mounting.
We recommend using a dispenser needle with this product. See below for compatible needles.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 16,72
už 1 vnt. (be PVM)
€ 20,23
už 1 vnt. (su PVM)
1
€ 16,72
už 1 vnt. (be PVM)
€ 20,23
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 5 | € 16,72 |
| 6 - 14 | € 15,96 |
| 15+ | € 15,58 |
Techniniai dokumentai
Specifikacijos
Markė
RS ProAdhesive Type
Acrylic Adhesive
Application
Sealing
Material Compatibility
Metal, Plastic
Spalva
Red
Product Form
Liquid
Pakuotės tipas
Syringe
Package Size
10 ml
Cure Time
1 h
Viscosity Measurement
1450mPa/s
Maksimali darbinė temperatūra
+140°C
Special Features
Solvent Resistant
Chemical Composition
Aliphatic Amines, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether
Specific Gravity
1.16
Kilmės šalis
United Kingdom
Produkto aprašymas
RS Pro Heat Cured SMT Adhesive
Our RS Pro range of heat cured SMT Adhesive is a one part thixotropic paste adhesive that will provide a great bond for the protection of electronic components by either dipping or “glob topping. It packs a punch in great “green strength” or stickiness to ensure that the components do not move during handling. With the adhesive being supplied in a syringe, it makes for effortless mounting.
We recommend using a dispenser needle with this product. See below for compatible needles.