Phoenix Contact MINI MCR Series Signal Conditioner, RTD Input, Current, Voltage Output, 24V dc Supply
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
RTD
Output Signal Type
Current, Voltage
Input Range
-150°C to +300°C
Output Range
0 → 10 V, 0 → 20mA
Supply Voltage
24V dc
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Serija
MINI MCR
Number of Channels
1
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+65°C
Distrelec Product Id
17689586
Kilmės šalis
Germany
Produkto aprašymas
Configurable PT100 Transducer
The 2864273 from Phoenix contact is a reliable and great 3-way isolated temperature measuring transducer. This module allows you to connect PT 100-resistance thermometers to it in a 2,3 or 4 conductor connection method. Default parameters are easily changed by the simple DIP switch located on the side of the module that will allow you to change the connection method, temperature range to be measured, output signals and type of fault for evaluation.
Voltage to the device (19.2 V DC or 30 V DC) can be supplied using a TBUS DIN rail connector or via the terminal blocks.
€ 197,60
€ 197,60 už 1 vnt. (be PVM)
€ 239,10
€ 239,10 už 1 vnt. (su PVM)
1
€ 197,60
€ 197,60 už 1 vnt. (be PVM)
€ 239,10
€ 239,10 už 1 vnt. (su PVM)
1
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
Techniniai dokumentai
Specifikacijos
Markė
Phoenix ContactModule Type
Temperature Converter
Input Signal Type
RTD
Output Signal Type
Current, Voltage
Input Range
-150°C to +300°C
Output Range
0 → 10 V, 0 → 20mA
Supply Voltage
24V dc
Tvirtinimo tipas
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Serija
MINI MCR
Number of Channels
1
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+65°C
Distrelec Product Id
17689586
Kilmės šalis
Germany
Produkto aprašymas
Configurable PT100 Transducer
The 2864273 from Phoenix contact is a reliable and great 3-way isolated temperature measuring transducer. This module allows you to connect PT 100-resistance thermometers to it in a 2,3 or 4 conductor connection method. Default parameters are easily changed by the simple DIP switch located on the side of the module that will allow you to change the connection method, temperature range to be measured, output signals and type of fault for evaluation.
Voltage to the device (19.2 V DC or 30 V DC) can be supplied using a TBUS DIN rail connector or via the terminal blocks.