Techniniai dokumentai
Specifikacijos
Markė
ParkerConnector A
BSP 3/4
Connector A
Hose
Connector A - Thread Size
3/4in
Hydraulic Fitting Type
Crimped Hose Fitting
Hydraulic Fitting Type
Straight Hose to Port
Connector B
Female BSP Parallel Pipe - Swivel (60° Cone)
Connector B - Thread Size
3/4""-14in
Medžiaga
Steel
Finish
Zinc Plated
Connector A - Thread Standard
BSP
Connector A - Gender
Female
Connector B - Gender
Female
Maximum Operating Pressure
215bar
Maximum Operating Pressure
420bar
Kilmės šalis
Germany
Produkto aprašymas
Swivel Female Straight
Parkers Parkrimp No-Skive medium pressure fittings 48 series are permanent, crimp style hydraulic fittings that allow quick assembly with Parkrimp crimpers. Assembly of these fittings does not require removal of the outer cover of the hose. This eliminates premature hydraulic hose failure caused by skiving too long or short. The 48 series fittings are used with wire braided hydraulic hoses, water cleaning hoses, rail hoses with fire retardant cover and suction and return hoses.
Standards
SAE J1273 and ISO 17165-2
Self-Assembly Crimped Fittings
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 27,93
už 1 vnt. (be PVM)
€ 33,80
už 1 vnt. (su PVM)
1
€ 27,93
už 1 vnt. (be PVM)
€ 33,80
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 27,93 |
5 - 9 | € 26,50 |
10 - 24 | € 24,70 |
25+ | € 24,22 |
Techniniai dokumentai
Specifikacijos
Markė
ParkerConnector A
BSP 3/4
Connector A
Hose
Connector A - Thread Size
3/4in
Hydraulic Fitting Type
Crimped Hose Fitting
Hydraulic Fitting Type
Straight Hose to Port
Connector B
Female BSP Parallel Pipe - Swivel (60° Cone)
Connector B - Thread Size
3/4""-14in
Medžiaga
Steel
Finish
Zinc Plated
Connector A - Thread Standard
BSP
Connector A - Gender
Female
Connector B - Gender
Female
Maximum Operating Pressure
215bar
Maximum Operating Pressure
420bar
Kilmės šalis
Germany
Produkto aprašymas
Swivel Female Straight
Parkers Parkrimp No-Skive medium pressure fittings 48 series are permanent, crimp style hydraulic fittings that allow quick assembly with Parkrimp crimpers. Assembly of these fittings does not require removal of the outer cover of the hose. This eliminates premature hydraulic hose failure caused by skiving too long or short. The 48 series fittings are used with wire braided hydraulic hoses, water cleaning hoses, rail hoses with fire retardant cover and suction and return hoses.
Standards
SAE J1273 and ISO 17165-2