Nuvotem Talema 230V ac, 2 x 9V ac Toroidal Transformer, 80VA 2 Output
Techniniai dokumentai
Specifikacijos
Markė
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 9V ac
Galingumas
80VA
Number of Outputs
2
Secondary Current
4.44A
Aukštis
38mm
Weight
900g
Diameter
93mm
Matmenys
93 (Dia.) x 38mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Produkto aprašymas
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 57,48
už 1 vnt. (be PVM)
€ 69,55
už 1 vnt. (su PVM)
1
€ 57,48
už 1 vnt. (be PVM)
€ 69,55
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 9 | € 57,48 |
| 10 - 24 | € 54,15 |
| 25 - 49 | € 48,45 |
| 50 - 74 | € 42,84 |
| 75+ | € 37,05 |
Techniniai dokumentai
Specifikacijos
Markė
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 9V ac
Galingumas
80VA
Number of Outputs
2
Secondary Current
4.44A
Aukštis
38mm
Weight
900g
Diameter
93mm
Matmenys
93 (Dia.) x 38mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Produkto aprašymas
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558