Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maksimali darbinė temperatūra
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Tube Connection B - Type
Push In
Connector B
Push In 10 mm
Kilmės šalis
France
Produkto aprašymas
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 14,805
Each (In a Pack of 2) (be PVM)
€ 17,914
Each (In a Pack of 2) (su PVM)
2
€ 14,805
Each (In a Pack of 2) (be PVM)
€ 17,914
Each (In a Pack of 2) (su PVM)
2
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
2 - 8 | € 14,805 | € 29,61 |
10 - 18 | € 14,385 | € 28,77 |
20+ | € 13,44 | € 26,88 |
Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maksimali darbinė temperatūra
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Tube Connection B - Type
Push In
Connector B
Push In 10 mm
Kilmės šalis
France
Produkto aprašymas
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.