KEMET Ferrite Flat Cable Ferrite Core, 13 max. wires, Solid Core, Inner dims. 18.8 x 1.1mm
Techniniai dokumentai
Specifikacijos
Markė
KEMETMaximum Number of Wires
13
Type
Solid Core
Application
Consumer Electronics
Medžiaga
Ferrite
Outer Dimensions
23.8 x 15 x 6.3mm
Inner Dimensions
18.8 x 1.1mm
Inner Height
1.1mm
Inner Width
18.8mm
Outer Depth
15mm
Outer Height
6.3mm
Outer Width
23.8mm
Produkto aprašymas
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,658
Each (In a Bag of 5) (be PVM)
€ 0,796
Each (In a Bag of 5) (su PVM)
Standartas
5
€ 0,658
Each (In a Bag of 5) (be PVM)
€ 0,796
Each (In a Bag of 5) (su PVM)
Standartas
5
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina | Per Maišas |
|---|---|---|
| 5 - 45 | € 0,658 | € 3,29 |
| 50 - 120 | € 0,455 | € 2,28 |
| 125 - 245 | € 0,442 | € 2,21 |
| 250 - 835 | € 0,432 | € 2,16 |
| 840+ | € 0,42 | € 2,10 |
Techniniai dokumentai
Specifikacijos
Markė
KEMETMaximum Number of Wires
13
Type
Solid Core
Application
Consumer Electronics
Medžiaga
Ferrite
Outer Dimensions
23.8 x 15 x 6.3mm
Inner Dimensions
18.8 x 1.1mm
Inner Height
1.1mm
Inner Width
18.8mm
Outer Depth
15mm
Outer Height
6.3mm
Outer Width
23.8mm
Produkto aprašymas
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.