INA Bearing Inserts 25mm ID 52mm OD RAE25-XL-NPP-B

RS kodas: 137-1526Gamintojas: INAGamintojo kodas: RAE25-XL-NPP-B
brand-logo
Žiūrėti viską Guolių įdėklai

Techniniai dokumentai

Specifikacijos

Markė

INA

Inside Diameter

25mm

Outside Diameter

52mm

Medžiaga

Steel

Static Load Rating

7800N

Dynamic Load Rating

14900N

Produkto aprašymas

Radial Insert Ball Bearings with Eccentric Locking Collar

INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.
The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.
The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.
The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.
To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.
In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)

INA

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 32,87

už 1 vnt. (be PVM)

€ 39,77

už 1 vnt. (su PVM)

INA Bearing Inserts 25mm ID 52mm OD RAE25-XL-NPP-B
sticker-462

€ 32,87

už 1 vnt. (be PVM)

€ 39,77

už 1 vnt. (su PVM)

INA Bearing Inserts 25mm ID 52mm OD RAE25-XL-NPP-B
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Pirkti dideliais kiekiais

kiekisVieneto kaina
1 - 4€ 32,87
5 - 9€ 31,54
10 - 24€ 29,74
25+€ 29,07

Techniniai dokumentai

Specifikacijos

Markė

INA

Inside Diameter

25mm

Outside Diameter

52mm

Medžiaga

Steel

Static Load Rating

7800N

Dynamic Load Rating

14900N

Produkto aprašymas

Radial Insert Ball Bearings with Eccentric Locking Collar

INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.
The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.
The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.
The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.
To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.
In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)

INA