INA KH16-PP Linear Ball Bearing- Both Sides Sealed 16mm I.D, 24mm O.D
Techniniai dokumentai
Specifikacijos
Markė
INAInside Diameter
16mm
Outside Diameter
24mm
Race Width
30mm
Ball Bearing Type
Linear Ball Bearing
Sealing Arrangement
Both Sides Sealed
Bearing Clearance
CN
Medžiaga
Steel
Ball Material
Steel
Cage Material
Polyamide
Number of Rows
1
Static Load Rating
910N
Dynamic Load Rating
1.06kN
Bore Type
Parallel
Partial Bearing Code
KH16PP
Race Type
Plain
Kilmės šalis
Germany
Produkto aprašymas
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 22,80
už 1 vnt. (be PVM)
€ 27,59
už 1 vnt. (su PVM)
1
€ 22,80
už 1 vnt. (be PVM)
€ 27,59
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
| kiekis | Vieneto kaina |
|---|---|
| 1 - 4 | € 22,80 |
| 5 - 9 | € 21,94 |
| 10 - 24 | € 20,62 |
| 25+ | € 20,24 |
Techniniai dokumentai
Specifikacijos
Markė
INAInside Diameter
16mm
Outside Diameter
24mm
Race Width
30mm
Ball Bearing Type
Linear Ball Bearing
Sealing Arrangement
Both Sides Sealed
Bearing Clearance
CN
Medžiaga
Steel
Ball Material
Steel
Cage Material
Polyamide
Number of Rows
1
Static Load Rating
910N
Dynamic Load Rating
1.06kN
Bore Type
Parallel
Partial Bearing Code
KH16PP
Race Type
Plain
Kilmės šalis
Germany
Produkto aprašymas
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.